Vertebral column: features of the vertebrae

Vertebral column: Overview  |  Features of the vertebrae  |  Related terms  |  Ligaments and membranes  |  Joints

Cervical vertebrae

The seven vertebrae at the top of the column (cervical vertebrae). The first and second (atlas and axis) have special shapes; the third to seventh are much alike and are described here as the typical cervical vertebra.

PartFeatures
1BodyBecomes larger from above downward, but is smaller than the thoracic and lumbar bodies.
2Transverse process
The only vertebrae with a transverse foramen; the vertebral artery and vein pass through it.

The vertebral artery usually enters at C6, and the vertebral vein usually leaves through the foramen of C7.

The tip ends in an anterior tubercle and a posterior tubercle. The anterior tubercle represents a rib element; the posterior tubercle is the true transverse process.

The anterior tubercle of C6 is especially large (the carotid tubercle). It can be felt in the neck just behind the common carotid artery, which can be pressed against it, and it is a landmark for finding the vertebral artery.

3Vertebral foramenLarge and oval to triangular.
4Spinous processBecomes longer from above downward. The spinous process of C7 projects far backward and is easily felt under the skin (vertebra prominens). The tip is thickened into a tubercle or split in two (bifid). The lower ones slope more steeply downward.
  • C4 (left lateral view)C4 (left lateral view)
  • C4 (superior view)C4 (superior view)
  • C4 (anterior view)C4 (anterior view)
  • Cervical spine from the left with notes on C3–C7C3–C7 explained
  • Typical cervical vertebra from above with the spinal cord and spinal nerveCervical vertebra and nerves

First cervical vertebra (atlas)

The atlas has no body and no spinous process.
PartFeatures
1OverallRing-shaped.
2Vertebral foramenVery large, enclosed by the anterior arch in front and the posterior arch behind. Where the two arches meet, the bone is greatly thickened: the lateral mass. The transverse ligament of atlas, stretched between the two lateral masses, divides the foramen into two: the dens of the axis lies in the front part, and the back part is the true vertebral foramen.
3Transverse processProjects laterally from the lateral mass and has a transverse foramen. It has no anterior and posterior tubercles like those of C3–C7.
4Others

· In the middle of the front of the anterior arch is a small tubercle, the anterior tubercle; the longus colli attaches to it.

· On the back of the anterior arch is a smooth small facet, the facet for dens, which articulates with the dens of the axis.

· In the middle of the posterior arch is a small elevation in place of a spinous process, the posterior tubercle; the rectus capitis posterior minor arises from it.

· On the upper surface, where the posterior arch joins the lateral mass, is the groove for vertebral artery.

· The lateral masses correspond to the superior and inferior articular processes of other vertebrae and carry articular facets above and below. The upper one, the superior articular facet, articulates with the occipital bone; the lower one, the inferior articular facet, articulates with the superior articular facet of the axis.

Note: some texts call the atlas facets "superior and inferior articular fossae"; others use the same names as for other vertebrae (superior and inferior articular facets).

  • Atlas from above with notesAtlas (superior view)
  • Atlas (anterior view)Atlas (anterior view)
  • Atlas (left lateral view)Atlas (left lateral view)

Second cervical vertebra (axis)

The dens projects upward from the upper surface of the body of the axis.
PartFeatures
1BodyThe dens rises from its upper surface and articulates with the facet for dens of the atlas and with the transverse ligament of atlas (median atlanto-axial joint). The dens represents the body of the atlas: during development it separates from the atlas and fuses with the body of the axis, and the atlas turns with the skull around it.
2Spinous processLarge, with a bifid tip. The rectus capitis posterior major and the obliquus capitis inferior arise from it.
  • Axis from the left with notesAxis (left lateral view)
  • Axis (superior view)Axis (superior view)
  • Axis (anterior view)Axis (anterior view)

Thoracic vertebrae

The twelve vertebrae below the cervical vertebrae (thoracic vertebrae); the uppermost is T1 and the lowest T12.

They have the typical shape of a vertebra and articulate with the ribs.
PartFeatures
1Body

Becomes larger from above downward; larger than the cervical but smaller than the lumbar bodies. On the side of the body are small articular facets for the ribs, the costal facets.

[Costal facets]

· T1–T9: each has two, a superior costal facet and an inferior costal facet.

· T10: only a superior costal facet.

· T11 and T12: a single costal facet each, not divided into superior and inferior.

[How the ribs join the thoracic vertebrae]

· Rib 1 ⇒ only the superior costal facet of T1.

· Ribs 2–10 ⇒ the inferior costal facet of the vertebra above and the superior costal facet of the vertebra of the same number (for example, rib 2: inferior facet of T1 and superior facet of T2).

· Ribs 11 and 12 ⇒ the costal facet of the vertebra of the same number.

2Transverse processProjects backward and laterally. Its tip carries a small articular facet for the rib, the transverse costal facet; this is absent on T11 and T12. The transverse processes become shorter lower down and are small on T11 and T12.
3Vertebral foramenRound to oval.
4Spinous process

Long and three-sided; they overlap one another like roof tiles.

· T1–T8: they slope more steeply from above downward.

· T9–T11: the slope becomes less steep.

· T12: almost horizontal.

  • Thoracic vertebrae from the left with notesOverview
  • Thoracic vertebrae from the left: how the ribs join the costal facetsConnections with the ribs
  • T2 (left lateral view)T2 (left lateral view)
  • T2 (superior view)T2 (superior view)
  • T2 (anterior view)T2 (anterior view)

Lumbar vertebrae

What projects laterally is the costal process; the original transverse process is represented by the accessory process (and the mammillary process).
PartFeatures
1BodyThe largest of all vertebrae (lumbar vertebrae); the bodies become wider from above downward.
2Vertebral foramenRoughly triangular; larger than in the thoracic vertebrae.
3Spinous processQuadrangular, short and broad; projects almost horizontally backward.
4Costal processA flat process projecting laterally from the side of the pedicle. It represents the rib of this region and is usually called the transverse process in English texts.
5Mammillary processA small rounded tubercle on the posterior border of the superior articular process. Like the accessory process, it is regarded as part of the original transverse process.
6Accessory processA small spine-like projection on the back of the root of the costal process. It is a remnant of the original transverse process; muscles attach to it.
  • Lumbar vertebrae from the left and from above with notesOverview
  • L4 (left lateral view)L4 (left lateral view)
  • L4 (superior view)L4 (superior view)
  • L4 (anterior view)L4 (anterior view)

Sacrum

The sacrum is formed by the fusion of five sacral vertebrae with their rib elements.

The largest bone of the vertebral column; it forms the back wall of the pelvis.

PartFeatures
1Overall shape

Wedge-shaped: it becomes thinner from above downward and is curved forward.

Sex difference: in women the sacrum is shorter and relatively wider and less curved than in men, and the joint with the coccyx is more mobile.

2BaseThe oval surface at the upper end; it is joined to L5 by an intervertebral disc. Its front edge projects strongly forward as the promontory. Behind it is the triangular entrance to the sacral canal, the continuation of the vertebral canal, which contains the cauda equina. On each side of the entrance is a superior articular process, which articulates with the inferior articular process of L5.
3ApexThe lower end, formed by the fifth sacral vertebra. Its lower surface is a transversely oval facet joined to the coccyx, either through an intervertebral disc (sacrococcygeal joint) or by bony fusion.
4Anterior (pelvic) surfaceFaces the pelvic cavity; smooth and slightly concave, curving forward further down. In the middle are four transverse ridges marking the boundaries between the fused sacral vertebrae. Lateral to them are four pairs of anterior sacral foramina, through which the anterior rami of the sacral nerves leave.
5Posterior surface

Much rougher than the front, with five wavy longitudinal ridges.

· Median sacral crest: the midline ridge, formed by the fused spinous processes of the sacral vertebrae; it shows four tubercles.

· Intermediate sacral crests (two): just lateral to the median crest (medial to the posterior sacral foramina); formed by the fused articular processes. Also called the medial sacral crest.

· Lateral sacral crests (two): the outermost ridges (lateral to the posterior sacral foramina); formed by the fused transverse processes.

Just lateral to the intermediate crests are four pairs of posterior sacral foramina, for the posterior rami of the sacral nerves. The lower ends of the intermediate crests project downward as the sacral cornua; with the lower end of the median crest they bound the sacral hiatus.

6Lateral partThe part lateral to the anterior and posterior sacral foramina, formed by fused transverse processes and rib elements. On the upper side is the auricular surface, which articulates with the ilium (sacroiliac joint); this joint allows very little movement. The rough area on the back of the lateral part is the sacral tuberosity, to which the interosseous sacroiliac ligament attaches.
  • Sacrum from several sides with notesWhole sacrum explained
  • Sacrum and coccyx, anterior viewSacrum and coccyx (anterior view)
  • Sacrum and coccyx, posterior viewSacrum and coccyx (posterior view)
  • Sacrum and coccyx, left lateral viewSacrum and coccyx (left lateral view)
  • Sacrum, superior viewSacrum and coccyx (superior view)

Coccyx

The coccyx is formed by the fusion of 3–5 coccygeal vertebrae; it may also fuse with the sacrum.

· More coccygeal segments are laid down in the embryo than persist; usually only three to five remain.

· One pair of coccygeal nerves leaves at the level of the first coccygeal vertebra; no spinal nerves arise below it.

· When the coccyx is not fused with the sacrum, the two are joined by an intervertebral disc (sacrococcygeal joint).

PartFeatures
1Upper partThe part corresponding to the first coccygeal vertebra still shows features of a vertebra: two processes projecting upward, which correspond to superior articular processes, are the coccygeal cornua, and short transverse processes project laterally from their roots.
2The restBelow the first coccygeal vertebra the processes have regressed.
  • Coccyx from the front with notesCoccyx explained

Vertebral column: Overview  |  Features of the vertebrae  |  Related terms  |  Ligaments and membranes  |  Joints

References and sources

  1. FIPAT. Terminologia Anatomica, 2nd ed. (TA2), 2019.
  2. Gray H. Anatomy of the Human Body, 20th ed. (1918): The vertebral column.